Tilton cooling pumps are ideal for pumping oil through transmission and other radiators. They can also be used for many other applications, such as emptying fuel tanks or a circulation cooler. The cooling pumps are equipped with an internal bypass valve and are capable of pumping at a height of up to 2.5 m above the source from which it pumps. Tilton cooling pumps are a forced-flow pump, so its performance is directly proportional to the engine speed. For example, if the engine speed increases by 25%, the flow rate also increases by 25%. The Buna pump is designed for use with standard oils and coolants, while the Viton model is designed for use with aggressive liquids.
Continuous pumps are designed for use where the pumps must run continuously for more than two consecutive hours without cooling.
This Tilton pump is capable of operating up to 1000 hours of continuous operation.
Expenditure: 1-2 GPM (4.6-9.1 lit/min)
Port sizes: 3/8" NPT
Recommended line size: AN-8
The minimum size of the line: AN-4
Expenditure: 1-2 GPM (depending on load)
Maximum pressure: 50 PSI (3.4 bar)
Temperature range: 4-71 ° C / Peak: 130°C
Operating voltage: 12-Volt (DC)
Size: 8.57" x 3.93" x 3.62"
Application: transmission, differential, coolant, fuel tanks