~Controls Rear Camber from the bottom of knuckles. Can be adjusted shorter or longer than stock arms ~ Lowers the car in the rear by dropping the rear coilover lower mounting point 25-40mm depending on which bolt hole you use. A must for achieveing super low ride height in rear of FRS/BRZ. ~We recommend trimming excess material from rear subframe to allow easy access to adjusters when aligning car. ~Will work with 2008+ WRX that utilizes same RLCA design as FRS/BRZ. ~Sold in Pairs. ~Hand Tig welded Japanese steel ~Forged rod ends and adjusters with Low torque PTFE lined maintenance free bearings. ~Clamping adjusters as well as standard jam nuts to ensure your settings stay in place.